Partitioning
 

Main Options

• Use Existing Partitions

  Dacă această opțiune este disponibilă, atunci partițiile existente compatibile Linux au fost găsite și pot fi utilizate pentru instalare.

• Use Free Space

  Dacă aveți spațiu neutilizat pe discul dur, atunci această opțiune îl va utiliza pentru noua instalare de Mageia.

• Use Free Space on a Windows Partition

  If you have unused space on an existing Windows partition, the installer may offer to use it. This can be a useful way of making room for your new Mageia installation, but is a risky operation so you should make sure you have backed up all important files!

  With this option, the installer displays the remaining Windows partition in light blue and the proposed Mageia partition in dark blue with their intended sizes just underneath. You have the option to modify these sizes by clicking and dragging the gap between both partitions. See the following screenshot:

• Erase and use Entire Disk

  This option will allocate the entire drive for Mageia

  Avertisment

  This will erase ALL data on the selected hard drive. Take care! If you intend to use part of the disk for something else, or you already have data on the drive that you are not prepared to lose, then do not use this option.

  Important

  Țineți cont că acest lucru implică reducerea dimensiunii partiției Windows. Partiția trebuie să fie „curată”, adică Windows a fost închis corect ultima dată cînd a fost utilizat. De asemenea, partiția trebuie să fie și defragmentată, cu toate că această operație nu garantează că toate fișierele de pe partiție au fost mutate din zona care este pe cale să fie utilizată. Este foarte recomandat să vă salvați toate fișierele personale.

• Custom Disk Partitioning

  Aceasta vă oferă controlul total asupra amplasării instalării pe discurile dure.

• If the total available space is less than 50 GB, then only one partition is created. This will be the / (root) partition.

• If the total available space is greater than 50 GB, then three partitions are created

  • 6/19 of the total available place is allocated to / with a maximum of 50 GB

  • 1/19 is allocated to swap with a maximum of 4 GB

  • the rest (at least 12/19) is allocated to /home

• 50 GB for /

• 4 GB for swap

• and the remainder for /home

• To the left of the drop-down menus is a list of available partitions. For example: sda is a hard drive - and 5 is a partition number, followed by the (capacity, mount point, filesystem type) of the partition.

• If you have several partitions, you can choose various different mount points from the drop down menu, such as /, /home and /var. You can even make your own mount points, for instance /video for a partition where you want to store your films, or perhaps /Data for all your data files.

• For any partitions that you don't need to make use of, you can leave the mount point field blank.

• Click on Previous if you are at all unsure about your choice.

• Click on Next to proceed if you are sure that it is OK to erase every partition, every operating system and all data that might be on that hard disk.

• Modify the layout of your disk(s) here. You can remove or create partitions, change the filesystem or size of a partition and even view their details before you start.

• There is a tab at the top for every detected hard disk (or other storage device, like a USB key). In the screenshot above there are two available devices: sda and sdb.

• For all other actions: click on the desired partition first. Then view it, or choose a filesystem and a mount point, resize it or wipe it. Expert mode provides more options such as to label (name) a partition, or to choose a partition type.

• Continue until you have adjusted everything to your satisfaction, then click Done when you're ready.