. |  | Nazaj | Naprej

# Stage 1 (Pre-installation Stage)

### Zagon

The particular Welcome Screen that you will see when booting with the NetInstall media depends on whether you are booting on a BIOS or UEFI system. See the following two screenshots:

Slika 1. BIOS Welcome Screen

When booting up, you can choose to read the advanced help by pressing F2 and return to the installer screen by pressing F1. Otherwise, the boot will continue with default settings.

Slika 2. UEFI Welcome Screen

- Use the arrow keys to highlight Start Mageia Install and then press Enter.

For both BIOS and UEFI systems, you will then see a pop-up notification saying that USB devices are being detected:

### Namestitvena metoda

You can now choose an installation method via CDROM/HDD or Server (NFS, FTP or HTTP).

You also have the option to load third-party modules at this point.

- Move up or down the list using the arrow keys until the appropriate method of installation is highlighted.

- Press the Tab key until Ok is highlighted and then press Enter.

#### Strežnik

- If you don't know what to choose for a Network Installation, choose FTP server.

- On an enterprise network, FTP and rsync may be blocked, so using HTTP server is a good choice in this case.

After choosing any of the server options you will automatically proceed to the Omrežna povezava section.

#### CDROM/HDD

If you choose to install from either a CDROM or hard disk (or USB stick), a scan for storage devices will be performed:

- First, select the relevant hard drive (or USB stick)

- Followed by the relevant partition

- Then specify the directory or the file name of the ISO

Leaving this open, or using the directory is easier, because the installer then presents you with a list of directories and files from which you can make your selection using the up and down arrows, as seen in the second of the following images.

Once the information has been provided for the location of the ISO, either on CDROM or HDD, you will automatically proceed to Stage 2 (the actual installation stage).

#### Load Third-Party Modules

If you wish to Load third-party modules, then you will be asked for the location of the directory containing the modules:

### Omrežna povezava

#### Omrežna naprava

If you chose any of the server options at the Installation Method step, you will then be asked to choose a network device:

#### Tip povezave:

Now you need to choose whether the network device will use a DHCP, Static or ADSL connection:

If you are unsure which option is suitable, then you should probably accept the default option (DHCP).

#### Imena gostiteljev/domen

If necessary, you can now supply your Host and Domain names:

- If you are unsure what this means then you can just leave the fields blank, highlight Ok and press Enter to proceed. The network connection will now be activated.

If you are using either FTP or HTTP, you will automatically proceed to the Zrcalni strežniki section

If you are using NFS, you will be asked for the NFS server name and the directory containing the Mageia distribution:

After entering the NFS details, you will automatically proceed to Stage 2 (the actual installation stage).

### Zrcalni strežniki

If using FTP or HTTP, you now have to specify a mirror to use. This can be done manually or by choosing from a list

#### Ročno določi

You will find a list of all available mirrors here: http://mirrors.mageia.org/

Whichever mirror you choose, it should use the same tree-like structure from "mageia" (or "Mageia") as used by the official Mageia mirrors. That means .../mageia/distrib/<version>/<arch>

A correct entry (when using an official mirror) in the Mageia directory field below, could be:

`pub/linux/mageia/distrib/cauldron/i586`

Drug primer za Mageia 6 x86_64 bi lahko bil::

`pub/Mirrors/Mageia/distrib/6/x86_64`

Druga zrcala imajo lahko drugačno strukturo, npr. tako kot je prikazana na spodnjih zaslonskih posnetkih:

Pri uporabi strežnika FTP:

Pri uporabi strežnika HTTP:

Once this information has been provided, you will automatically proceed to Stage 2 (the actual installation stage).

#### Izberite s seznama

V primeru, da se kasneje v namestitvi pojavi več napak z manjkajočimi odvisnostmi, ponovno zaženite računalnik ter ponovite namestitev, a z drugega zrcala.

Po izboru strežnika FTP se bo pokazalo pogovorno okno, kjer lahko po potrebi dodate uporabniško ime in geslo.

Once this information has been provided, you will automatically proceed to Stage 2 (the actual installation stage).

© Mageia
CC BY-SA 3.0

Nazaj |  | Naprej
| Domov |

- Contents
- Search

- Predstavitev
  - NetInstall Media
    - Opis
    - Availability
    - Priprava
  - Koraki namestitve
- Stage 1 (Pre-installation Stage)
  - Zagon
  - Namestitvena metoda
    - Strežnik
    - CDROM/HDD
    - Load Third-Party Modules
  - Omrežna povezava
    - Omrežna naprava
    - Tip povezave:
    - Imena gostiteljev/domen
  - Zrcalni strežniki
    - Ročno določi
    - Izberite s seznama
- Stage 2 (Installation Stage)
  - Izberite jezik namestitve
  - Licenčna pogodba in opombe ob izdaji
    - Licenčna pogodba
    - Opombe ob izdaji
  - Nastavitev naprav SCSI
  - Namestitev ali nadgradnja
  - Tipkovnica
  - Razdelitev diska
    - Predlagana razdelitev diska
    - Izberite priklopne točke
    - Potrdi formatiranje trdega diska
    - Razdeljevanje diska po meri s programom DiskDrake
    - Formatiranje
  - Software
    - Izbira virov
      - Supplemental Installation Media
      - Available Media
    - Izbira namizja
    - Izbira skupin paketov
    - Minimalna namestitev
    - Izbira posamičnih paketov
  - Upravljanje z uporabniki
    - Nastavite geslo skrbnika (uporabnika root):
    - Dodajte uporabnika
    - Upravljanje z uporabniki (napredno)
  - Graphical Configuration
    - Nastavitev grafične kartice in monitorja
    - Izberite strežnik X ()nastavite grafično kartico
    - Izberite vaš zaslon
  - Zagonski nalagalnik
    - Available Bootloaders
      - Grub2
      - rEFInd
    - Bootloader Setup
      - Glavne možnosti zagonskega nalagalnika
      - Nastavitev zagonskega nalagalnika
    - Druge možnosti
      - Uporaba obstoječega zagonskega nalagalnika
      - Installing Without a Bootloader
      - Add or Modify a Boot Menu Entry
  - Configuration Summary
    - Sistemske nastavitve
    - Strojne nastavitve
    - Nastavitve omrežja in interneta
    - Varnost
  - Locale
    - Izbor države/regije
      - Način vnosa
  - Nastavite vaše storitve
  - Izberite miško
  - Nastavitve zvoka
    - Napredno
  - Stopnja varnosti
  - Požarni zid
  - Posodobitve
  - Čestitke
  - Odstrani Magejo

Search